loading.gif
Notes
Login Sign Up Shopping Cart 简体中文
Add to my favorite categories
category Sun
Path Yahoo Bid > Computer & Accessories > Desktops > Sun
Remarks
Add my favorite keywords
Keywords
category Sun
Remarks
Join my favorite seller
Seller nfukute
Remarks
Add to my blacklist seller
Seller nfukute
Remarks
Yahoo Bid Computer & Accessories Desktops Sun
Sun Fire280R

  • Product Quantity
    : 1
  • Starting Bid
    :48,000円
  • Highest Bidder
    : Shown on original page
  • Listing Date
    :2025年04月24日 18時55分
  • Bidding closes on
    :2025年04月27日 18時55分
  • Auction Number
    :r1159763367
  • Product Condition
    :Damaged and stained (specify in description)
  • Automatic Extension
    :Yes
  • Authentication
    :No
  • Early Closing
    :Yes
  • Can I return the product?
    :no
Notes
  1. Faulty product, please pay attention before subscribing
  2. Please note: Sellers with a rating lower than 50 or an overall rating lower than 98% cannot provide compensation for non-arrival of goods. Please choose a reputable seller.
Sun Fire280R です。UltraSPARC-III+ 1.2GHz x2
Memory 8GB
HDD 68GB x 2
XVR-100
イーサネット x 3

動作品ですがパワーサプライ一つに警告がありますのでジャンクとしてください。
RSCがついているのでリモートから電源を入れたり
監視が出来ます。
リモートデスクトップをインストールしてあるので
VNCを使ってリモート接続も出来ます。
本体とキーボードのみです。
インストールメディアはご希望の方にダウンロードした
ファイルをつけます。
Solaris10 です。SunstudioとNetBean、
SunSuite8がインストールしてあります。
詳しく分かる方お願いいたします。
3ボタンマウス、電源ケーブルもついてます。

(2024年 11月 16日 19時 40分 追加)
RSC Alert: Host System has Reset

RSC Alert: Power Supply 1 Failure.


Setting diag-switch? to true because of RSC command.

@(#)OBP 4.5.21 2003/02/24 17:23 Sun Fire 280R
BBC AID Register 0000.0000.0000.0000
Power-On Reset
Executing Power On SelfTest

0>@(#) Excalibur POST 4.7.4 2002/12/23 17:04
ated (firmware_re) taff/firmware_re/post/post-build-4.7.4/Camelot/excal/integr
0>Jump from OBP->POST.
0>CPUs present in system: 0 1
0>diag-switch? configuration variable set TRUE.
0>Diag level set to MIN.
0>MFG scrpt mode set to NONE
0>I/O port set to RSC.
0>Done with First Init, reset system.
0>Current CPU frequency is 400 MHz.
0> Resetting to 1200
0>Clock Synth Reset.
0>
0>Start selftest...
0>Init CPU
0> Cheetah_plus Version 11.0
0>DMMU Registers Access
0>DMMU TLB DATA RAM Access
0>DMMU TLB TAGS Access
0>IMMU Registers Access
0>IMMU TLB DATA RAM Access
0>IMMU TLB TAGS Access
0>Probe Ecache
0> Size = 00000000.00800000...
0>Ecache Data Bitwalk
0>Ecache Address Bitwalk
0>Scrub and Setup Ecache
0>Setup and Enable DMMU
0>Setup DMMU Miss Handler
0>Test and Init Temp Mailbox
1>Init CPU
1> Cheetah_plus Version 11.0
1>DMMU Registers Access
1>DMMU TLB DATA RAM Access
1>DMMU TLB TAGS Access
1>IMMU Registers Access
1>IMMU TLB DATA RAM Access
1>IMMU TLB TAGS Access
1>Probe Ecache
1> Size = 00000000.00800000...
1>Ecache Data Bitwalk
1>Ecache Address Bitwalk
1>Scrub and Setup Ecache
1>Setup and Enable DMMU
1>Setup DMMU Miss Handler
1>Test and Init Temp Mailbox
0>Initializing Scan Database
0>BBC: 1483203b
0>SCSI: 15060045
0>ICHIP: 0d1e203b
0>RIO: 13e5d03b
0>IO-Bridge: 307be06d
0>CPMS0: 1142903b
0>CPMS1: 1142903b
0>CPMS2: 1142903b
0>CPMS3: 1142903b
0>CPMS4: 1142903b
0>CPMS5: 1142903b
0>Init I2C
0>Unquiesce Safari
0>Blast Fans
0>Set Trip Temp CPU 0 to 110C
0>Set Trip Temp CPU 1 to 110C
0>SAT NOV 16 6:58:42 GMT 24
0>Safari quick check
0> to IO-bridge_0
0>Safari full check
0> to IO-bridge_0
0>Probe and Setup Memory
0>INFO: 2048MB Bank 0
0>INFO: 2048MB Bank 1
0>INFO: 2048MB Bank 2
0>INFO: 2048MB Bank 3
0>
0>Data Bitwalk on Master
0> Test Bank 0.
0> Test Bank 1.
0> Test Bank 2.
0> Test Bank 3.
0>Address Bitwalk on Master
00.NFO: Addr walk mem test on CPU 0 Bank 0: 00000000.00000000 to 00000000.800000
00.NFO: Addr walk mem test on CPU 0 Bank 1: 00000001.00000000 to 00000001.800000
00.NFO: Addr walk mem test on CPU 0 Bank 2: 00000002.00000000 to 00000002.800000
00.NFO: Addr walk mem test on CPU 0 Bank 3: 00000003.00000000 to 00000003.800000
0>Set Mailbox
0>Setup Final DMMU Entries
0>Post Image Region Scrub
0>Run POST from Memory
0>Verifying checksum on copied image.
0>The Memory's CHECKSUM value is 2844.
0>The Memory's Content Size value is 8faa2.
0>Success... Checksum on Memory Validated.
0>Safari quick check
0> to IO-bridge_0
0>Safari full check
0> to IO-bridge_0
1>Safari quick check
1> to IO-bridge_0
1>Safari full check
1> to IO-bridge_0
1>Probe and Setup Memory
1>INFO: No memory on cpu 1
1>Set Mailbox
1>Data Bitwalk on mem
1> Test Bank 0.
1> Test Bank 1.
1> Test Bank 2.
1> Test Bank 3.
1>Setup Final DMMU Entries
1>Map Slave POST to master memory
1>Print Mem Config
1>Caches : Icache is ON, Dcache is ON, Wcache is OFF, Pcache is ON.
0>Print Mem Config
0>Caches : Icache is ON, Dcache is ON, Wcache is OFF, Pcache is ON.
0>Memory in non-interleave config:
0> Bank 0 2048MB : 00000000.00000000 -> 00000000.80000000.
0> Bank 1 2048MB : 00000001.00000000 -> 00000001.80000000.
0> Bank 2 2048MB : 00000002.00000000 -> 00000002.80000000.
0> Bank 3 2048MB : 00000003.00000000 -> 00000003.80000000.
0>Scrub Memory
0>Quick Block Mem Test
0>Quick Test 16777216 bytes at 00000000.00600000
0>40% Done...
1>Flush Caches
0>Flush Caches
0>IO-Bridge unit 0 init test
0>IO-Bridge unit 0 reg test
0>IO-Bridge unit 0 mem test
0>IO-Bridge unit 0 PCI DMA A test
0>IO-Bridge unit 0 PCI DMA B test
0>IO-Bridge unit 0 PCI merg test
0>IO-Bridge unit 0 PCI iommu test
0>IO-Bridge unit 0 PCI stc test
0>IO-Bridge unit 0 interrupt test
1>IO-Bridge unit 0 init test
1>IO-Bridge unit 0 interrupt test
1>FPU Registers and Data Path
0>FPU Registers and Data Path
1>FPU Move Registers
0>FPU Move Registers
1>FSR Read/Write
0>FSR Read/Write
1>FPU Branch Instructions
0>FPU Branch Instructions
1>FPU Functional Test
0>FPU Functional Test
1>FPU BLOCK REG TEST
0>FPU BLOCK REG TEST
0>
0>Turn IO-Bridge 0 errors on
0>Turn error traps on
0>INFO:
0> POST Passed all devices.
0>POST: Return to OBP.
1>Return to OBP, PASS
0>Return to OBP, PASS

RSC Alert: Host System has Reset


Setting diag-switch? to true because of RSC command.

@(#)OBP 4.5.21 2003/02/24 17:23 Sun Fire 280R
BBC AID Register 0000.0000.0000.0000
POST Results: Cpu 0
%o0 0000.0000.0000.0000
%o1 0000.0000.0000.0000
%o2 0000.0000.0000.0000
POST Results: Cpu 1
%o0 0000.0000.0000.0000
%o1 0000.0000.0000.0000
%o2 0000.0000.0000.0000
CPU seeprom format: 0000.0000.0000.0002
Membase: 0000.0000.0000.0000
MemSize: 0000.0000.0010.0000
Clearing TLBs Done
Init CPU arrays Done
Init E$ tags Done
Setup TLB Done
MMUs ON
Copy Done
PC = 0000.07ff.f008.5970
PC = 0000.0000.0000.59e8
Decompressing Done
Size = 0000.0000.0006.fd20
ttya initialized
Start Reason: Initialize Machine
Configuring the machine:

RSC Alert: Host System has Reset



Setting diag-switch? to true because of RSC command.

@(#)OBP 4.5.21 2003/02/24 17:23 Sun Fire 280R
BBC AID Register 0000.0000.0000.0000
Loading Configuration
Membase: 0000.0000.0000.0000
MemSize: 0000.0002.0000.0000
Clearing TLBs Done
Init CPU arrays Done
Init E$ tags Done
Setup TLB Done
MMUs ON
Block Scrubbing Done
Copy Done
PC = 0000.07ff.f008.5970
PC = 0000.0000.0000.59e8
Decompressing Done
Size = 0000.0000.0006.fd20
ttya initialized
Start Reason: First start after Power On
System Reset: (SPOR) (PLL)
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
memory-controller
Probing gptwo at 1,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
memory-controller
Probing gptwo at 8,0 pci pci
Loading Support Packages: kbd-translator
Loading onboard drivers: ebus flashprom bbc power i2c dimm-fru dimm-fru
dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru nvram idprom
i2c cpu-fru temperature cpu-fru temperature fan-control
motherboard-fru ioexp ioexp ioexp fcal-backplane
remote-system-console power-distribution-board power-supply
power-supply rscrtc beep rtc gpio pmc parallel rsc-control
rsc-console serial
CPU 0 set ambient power off temperature to 70 degrees C
CPU 0 set junction power off temperature to 110 degrees C
CPU 1 set ambient power off temperature to 70 degrees C
CPU 1 set junction power off temperature to 110 degrees C
t after Power On forced input/output devices to the RSC.Start Reason: First star
System Reset: (SPOR) (PLL)
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
memory-controller
Probing gptwo at 1,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
memory-controller
Probing gptwo at 8,0 pci pci
Loading Support Packages: kbd-translator
Loading onboard drivers: ebus flashprom bbc power i2c dimm-fru dimm-fru
dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru nvram idprom
i2c cpu-fru temperature cpu-fru temperature fan-control
motherboard-fru ioexp ioexp ioexp fcal-backplane
remote-system-console power-distribution-board power-supply
power-supply rscrtc beep rtc gpio pmc parallel rsc-control
rsc-console serial
CPU 0 set ambient power off temperature to 70 degrees C
CPU 0 set junction power off temperature to 110 degrees C
CPU 1 set ambient power off temperature to 70 degrees C
CPU 1 set junction power off temperature to 110 degrees C
WARNING: RSC has forced input/output devices to the RSC.
Sun Fire 280R (2 X UltraSPARC-III+) , Keyboard Present
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.5, 8192 MB memory installed, Serial #56329985.
Ethernet address 0:3:ba:5b:87:1, Host ID: 835b8701.




Resetting ...


RSC Alert: Host System has Reset



(2025年 1月 5日 9時 16分 追加)
現在はパワーサプライに警告はありません。家庭用電源が容量が足らなかった様です。、
Please log in before asking questions
Question list
All replies from original sellers (total number of questions: items)
After the seller responds, the original page will display the question
Product amount JPY
Consumption tax (10%)
Estimated local shipping fee JPY
Product forecast measurement table kg(Product forecast weight table)
International Freight Methods

Notes:

  • Compare the actual weight with the volume weight, and the larger one will be the billing weight
  • Volume weight (KG) = length (L) (cm) X width (W) (cm) X height (H) (cm) / 5000
  • Common volume weight products: furniture, fishing rods, car parts...
  • A "consolidation handling fee" (price list)
    
Proxy bidding and purchasing services are becoming increasingly convenient. However, overseas shopping carries certain risks and issues. To reduce these risks and enhance shopping safety, please be sure to read the following information:

1. International Shipping

   Air Freight: If the item status is not confirmed within two days after the arrival notice, any customer complaints cannot be addressed with the seller.

2. After Receiving the Product

Please confirm and inspect the product as soon as possible to ensure that the product specifications, quantity, accessories, and description are correct

If, unfortunately, there are any issues, you can refer to the following examples on how to report related product problems:
1. Example of missing product information
2. Example of product not matching provided information
3. Example of damaged product information

Important Notes: 1. If the seller is unwilling to ship overseas or is unaware that the product will be shipped overseas, the international shipping cost for returns or exchanges will need to be borne by the member. You may refer to the EMS e-Express fee inquiry from the post office. If it involves alcoholic beverages or items that affect flight safety, the post office cannot be used for shipment, and only DHL can be used to ship back to Japan.
2. During the product complaint handling period, please retain the complete outer packaging of the product (including the shipping label information), and refrain from attempting any repairs or altering the original condition. Any modifications may result in the inability to process the case.

3. After Inspecting the Product

After receiving and inspecting the item, if you have any questions, it is recommended to contact Letao within 2 hours. Here are some reminders:

1. Please do not unpack, use or repair the received item yourself, and be sure to keep the original packaging to facilitate subsequent handling of related matters, so as to avoid changes to the item that may cause the seller to be unwilling to process.

2. You can call customer service, and the customer service will leave a message for you as below. Please provide the following information:
"Hello, we will first help you establish a complaint case for Product ID: _______ .But we need you to 2-3 clear photos of the product issue, including photos of the product problem, product packaging, shipping details slip, and outer box. Send them to service@letao.my and inform us of your desired resolution (failing to provide this may result in an inability to process subsequent matters). After sending the email, notify us in the customer service message. We will confirm with the seller as soon as possible. and if there are any related questions, we will contact you through the customer service message. Thank you for your cooperation."

Please provide:
1. "Product ID"
2. Photo of the "Delivery Note" (if any)
3. Photos of the outer box (including inner and outer packaging)
4. Photos of the product (Please include relevant descriptions to help us confirm with the seller)

Important Notes:
1. Do not include foreign text or other products in the background of the image.
2. Please keep the complete product packaging (including the shipping label information), and refrain from repairing or altering the original condition on your own, as any changes may result in the case being unable to be processed.
3. Please provide the relevant information within 48 hours to avoid missing the golden hour for reflection and causing situations that cannot be handled.
4. Due to 99% of Japanese sellers being unwilling or unaware of shipping goods overseas, if a seller is willing to handle the issue, the goods must be sent back to Japan, and the international shipping costs incurred must be borne by the member. Letao will use postal EMS international express to send the goods back to Japan.
5. As the goods are purchased from overseas, it may take approximately one to two weeks to complete the relevant processing procedures when issues arise with the goods. Please be reminded that you can inquire about the approximate cost through the EMS service at the post office.

4. FAQ

1. Issue of Authenticity: If antique or branded goods are found to be counterfeit upon receipt, clear photos showing the differences between the genuine product and the imitation must be provided as evidence. If unable to provide relevant proof, assistance can be sought to find a third-party reputable organization for a premium authentication service .
2. Leaking Iron Teapot: If an antique iron teapot is leaking, please take clear photos of the leaking area and provide them.
3. Transport Damage: If the goods are damaged during international shipping (to the pickup point), you need to provide photos of the outer packaging of the parcel and clear photos of the damaged goods' outer packaging.

※ Note: Photos provided to sellers should not contain any foreign-related information.
You may also like
    Seller products
    Excite Translate
    Add to watchlist and notes
    Product name: Sun Fire280R
    Notes:
    Customer service hours:
    • Monday to Friday 10:00-18:00
    Customer Service Email: service@letao.my